The elbow head of the pipe bending machine can move laterally along the guide rail, which is necessary for the pipe bender to adjust the pipe groove of the bending die to align with the center line of the machine tool after the bending die is replaced. It is more simple and convenient to adjust the centerline of the machine than to adjust the guide rail and tail seat on the bed body. The mandrel plays a role in supporting the inner wall of the pipe to prevent deformation during the process of bending. At present, if the mandrel is not used when the domestic pipe is bent on the machine, its quality is difficult to guarantee. And there are many kinds of mandrel, such as column mandrel, universal single, double, three, four ball head mandrel, directional single, multi ball head mandrel, etc. In addition, the position of the mandrel also has a certain degree of influence on the pipe bending forming. Theoretically speaking, its tangent line should be flush with the tangent line of the pipe bending die, but after a lot of practice has proved that 1 ~ 2mm in advance is better.
When the manual mode is entered, the screen can be made manually. Press the key on the side of the action description to operate and execute various actions accordingly. The end of the operation is determined by the time set to start. After the time is displayed as “in place”, the automatic mode starts to operate after the foot pedal. In the process of working state, the machine will stop working if the foot pedal is operated again. A workflow needs to be completed by one foot, i.e. once at the beginning of the work. In semi-automatic mode, the machine will start to operate after the pedal is stepped. In the working state, the machine will pause the action if the pedal is stepped again. If the machine needs to work again, the machine will step again and press the stop button to stop the work. A process flow allows for two foot work, i.e. once at the beginning of the work and once when the pipe is removed.
The machine starts to work after the trial-machine pedal. In the process of working state, the machine will stop working if the pedal is operated again. If it needs to work again, the machine will need to pedal again. Test machine related instructions: test machine is only applicable to the empty operation of the machine, can not be used for operation processing! Please carefully! Test machine only omitted from the first start of all foot action, other action flow and production process, the machine will be cyclic action after the start of the work, until the count value is equal to the number set at the beginning or consider the button stop state.
Get The Best Quote For Your Products