How many types of pipe bending machines are there? Why do some only cost a few thousand but you have tens of thousands or even hundreds of thousands? What is the difference? In fact, there are only three pipe bending machines: automatic pipe bending machine, hydraulic pipe bending machine, and CNC pipe bending machine. The automatic pipe bending machine is purely electric, driven by a motor, a transmission, and driven by a gear chain; while the hydraulic pipe bending machine is purely electric. It is to decompose the bending action, and use hydraulic pressure to drive the clamping and retreating, the bending of the elbow, the auxiliary advancing and retreating, the core entering and retreating and other actions. Today, our Taiwanese and mechanical experts will talk about the bending accuracy of the fully automatic pipe bending machine. In the end, what factors will affect the bending accuracy of the fully automatic pipe bending machine?
1. The thickness and roughness of the material
Laser cutting is suitable for cutting thin plates. The effective thickness is carbon steel below 12mm and stainless steel below 6mm. The processed quality is significantly enhanced, and efficiency is also guaranteed. If you cut materials less than 1mm, the cut will be smoother. The surface roughness of the material and the surface roughness of the material also determine the quality of the cutting. Generally, the smoother the material, the better the quality of the cut.
2. Working power and mode of CNC pipe bending machine
The research has proved that the higher the power of the CNC pipe bending machine, even if it is cutting the same plate, the effect will be better than normal. The laser cutting mode and material have a certain degree of fit, the higher the effect, the better.
3. Focus position
The focus of the laser cutting machine can be aligned, and the precision and accuracy of the cutting can meet the desired requirements.
4. Cutting speed
In fact, no matter what kind of material, the cutting speed can match the material, then the cutting effect at this time is better, too fast or too slow will affect the laser cutting.
5. Auxiliary gas pressure and type
The higher the pressure of the auxiliary gas, the higher the purity of the gas, the less impurities that the material adheres to, and the smoother the cut. Generally speaking, the speed of oxygen cutting is faster, and the cutting effect of nitrogen is good, and the cost is also low. Different gases have different cutting effects.
Get The Best Quote For Your Products