In order to keep the horizontal band sawing machine in good operating condition, regular and irregular maintenance is required for the sawing machine. Good maintenance of the machine body can ensure the best efficiency of the sawing machine.
Common failures caused by sliding sleeve tightening of horizontal band sawing machine include:
1、 The band sawing machine does not rise after cutting due to the tight sliding sleeve, and then stops; The sawing machine does not rise after the sliding sleeve is tightened down; Unstable falling, poor reliability of sawing machine sliding sleeve; There are sand holes on the sliding sleeve, and oil leaks from the small hole, which causes unstable sawing.
2、 Treatment measures for failure of band sawing machine bed due to sliding sleeve:
Check whether the sliding sleeve of band sawing machine is qualified; Confirm whether the size and specification of the sliding sleeve of the band sawing machine are appropriate; Before use, finally confirm whether the sliding sleeve of band sawing machine is suitable; When using, do not force the tight sliding sleeve to avoid secondary maintenance. Replace it in time and notify the manufacturer to solve the problem; When smashing the copper sleeve of the sawing machine, be careful not to miss it.
Get The Best Quote For Your Products