At present, the new aluminum profile extrusion press machine plant line and its cooling spray system, and has a bearing device for transporting aluminum profiles, and the bearing device is sprayed, the rapid cooling device is arranged above, and the rapid cooling device is arranged on the transportation device, and It has an upper opening and a channel through which the aluminum profile passes. By adopting this structure, the extruded aluminum profile can be quickly cooled, thereby greatly improving the overall production efficiency and higher production efficiency. Therefore, when installing the aluminum profile extrusion machine, it is necessary to What are the points to pay attention to?
Today, the use of an aluminum profile extrusion press machine plant line gearbox is well known and consists of an output shaft arranged in the body of the gearbox, a thrust pocket arranged on the left side wall of the gearbox, and the body of the gearbox passing through the thrust assembly to the aluminum profile extrusion press machine plant line. Connection, the sleeve is connected to the screw through the following components of the aluminum profile extrusion press machine plant line, and the conventional output shaft is divided into two parts: the output shaft and the coupling sleeve. The output shaft can be pre-assembled into a standard part. In other parts of the gearbox, the coupling sleeve It can be quickly customized according to user requirements to ensure production and processing in a shortened time.
At present, a new type of aluminum profile extrusion press machine plant line is used, which consists of a base fixedly mounted on the four corners of the base, passing through a fixed die and providing a movable die at the fixed die, the device with the lower conical table surface, and the cone The frosted layer on the inner wall of the shaped through hole is bonded, so that the raw material is polished finely to ensure the uniformity of the material particles, and the heating can be carried out more thoroughly and quickly, thereby indirectly improving the work efficiency.
The connecting rod aluminum profile extrusion press machine plant line is pushed down or up so that the space between the lower conical table and the conical through hole can be adjusted to control the fall of the material, accelerate and wait for cooling from the most resource-saving activated carbon particles, so in After filtering, it is discharged through pipe fittings and sent to the next process for processing to ensure the air quality of the injection molding workshop.
Get The Best Quote For Your Products