metal band sawing machine horizontal band saw belt stuffy vehicle skid or interrupted cutting fault and treatment measures


In the long-term work process, the saw belt of the metal band sawing machine horizontal band saw will have a boring car slipping or interrupted cutting failure.

The main reasons for the boring machine slipping or cutting interruption failure of the sawing machine are: the feed rate is too large; the overload protection overload is small; the saw belt tension is not enough.

The treatment measures are: reduce the feed; increase the overload; increase the tension.

After each day’s work, remove the iron filings accumulated on the sawing machine. After the saw belt of the sawing machine stops rotating, turn on the cooling water switch, and use the cooling water spray gun to clean the workbench. After clearing, lower the saw to its lowest position.


Get The Best Quote For Your Products

    We have tried to make this website comprehensive and factual.
    WONSTEN GROUP reserves the right to make changes at any time without notice, to price, color, material equipment, specifications, models, machine operation, tooling requirements and availability.