Comes with 7 dies in one, bending formers 3/8″, 1/2″, 9/16″, 5/8″, 3/4″, 7/8″, 1″, quick change between different demands…
Comes with 7 dies in one, bending formers 3/8″, 1/2″, 9/16″, 5/8″, 3/4″, 7/8″, 1″, quick change between different demands.
It can bend up to 2mm wall thickness tubing, easy operation, a fast, economical way to produce angled bends in round tubing.
High machining precision and stable machining quality.Makes smooth, tight-radius, capable of making different bends within 180 degree on solid round shape.
This manual pipe bender apply to the steel tube with drafty, seamless and neither hot- press nor cold -press in the cold condition:it also be used to metal pipe, stainless steel pipe, wire pipe, circle-steel pipe and low-pressure liquid jointing pipe.
Widely used in but not limited to building industry, chemical plant, central heating, shipping, machine manufacturing, house decorating, construction sites, garage and repair shop.
Wall thickness of pipe: <2mm
Bender angle:<180 degree
Base X 1
flexible plank X 1
the top model X 1
the roll X 1
hands X 1
cannula X 1
the fixation block X 1
1. Fix the base first
2. Choose the mold and roller according to the required size of the elbow
3. When in use, the mold is sleeved on the bottom shaft, and then the bracket is sleeved on the shaft, and then the roller is placed in the positioning block, and the bolt is sleeved and fixed
4. Pull the bracket to the rocking plate, insert the pipe that needs to be bent between the mold and the roller, adjust the nut, make the mold, tube and roller fit together, you can move the handle.
Get The Best Quote For Your Products