1. The straightening roller of the robotic automatic pipe bender is to prevent vertical deformation during the bending process, and it is used in conjunction with the floating ellipse-proof fixture to ensure that the ovality of the steel pipe after bending meets the requirements.
2. The high-pressure and low-pressure parts of the pump station of the manipulator automatic pipe bender provide power for the guide roller opening and closing, the swing arm clamping seat cylinder, the pushing device car chuck opening and closing, and the straightening roller opening and closing.
3. The guide roller device of the robotic automatic pipe bender consists of two sets of guide rollers, a frame and a clamping drive system. The opening and closing of the guide rollers is completed by hydraulic driving. Its function is to complete the horizontal bending of the steel pipe with the swing arm.
4. The pushing device (composed of trolley, bed, transmission shaft, traction chain, etc.) of the automatic pipe bending machine of the manipulator pushes the steel pipe forward, and the steel pipe bends under the action of the rocker arm and the guide roller.
5. The swing arm of the robotic automatic pipe bender is used to ensure that the bend radius of the pipe meets the requirements, and its clamping seat is to limit the rebound of the steel pipe during the bending process.
6. Manipulator automatic pipe bender driving device It is the power source of the pushing device. The article is organized by the Pakatan Bender.