Robotic automatic pipe bending machine is very common in life, with many functions, reasonable structure and simple operation. But after all, they are machines, because they are designed to be used as curved metal, which is dangerous. If it is not properly operated, it will be dangerous. The automatic bending machine of the robot is inserted directly from the upper part of the machine head during assembly. The installation is precise and easy to maintain. The elbow main shaft and the drive sprocket are integrally forged, the whole processing, the overall hobbing, the keyless connection, the uniform force, and the double cylinder During the process of driving and bending, the hydraulic system automatically throttles the buffer before approaching the angle set by the bending, greatly improving the bending precision, quickly resetting, and providing throttling buffer near the starting point during the returning process, greatly improving Reset accuracy and work efficiency. Fully hydraulic drive.
The microcomputer controller can be preset with 16 angles, and the entire process can be completed in one time using the foot switch of the robotic automatic bender. The manipulator automatic head bender head part and the bed part of the rib design, and after annealing to eliminate internal stress, the overall has sufficient strength and rigidity to prevent permanent deformation. When the drive spindle is assembled, it is directly inserted from the upper part of the machine head. It is accurate to install and easy to maintain. The elbow main shaft and the drive sprocket are integrally forged, the whole processing, the overall hobbing, the keyless connection, the uniform force, driven by the double cylinder, the bending process In the middle, the hydraulic system automatically throttles the buffer before approaching the angle set by the bending, greatly improving the bending precision, quickly resetting, and providing a throttling buffer near the starting point in the returning process, greatly improving the reset precision and working. effectiveness. Then, the staff of Botai Machinery will pay attention to the details of the use of the bender during the use of the bender.
1. First of all to ensure that the robotic automatic pipe bending machine is normal and ready to work. A lock / label should let you know what is safe to use. Check the final inspection date to see if there is a frame in the appropriate time, bending machine Multi-purpose moving parts may drag and drop over time, and the machine needs a certain amount of lubricant and safe running pressure.
2. Any foreign matter should be removed before power-on. Do not move the surface of the bender. Your body may eventually start the button or tilt it partially, which will cause you a lot of damage.
3, adjust the robot automatic pipe bending machine, the most suitable for your work range. If possible, adjust the safety of the machine or level, keep your body within safe range.
4. Apply all necessary protective equipment and use all necessary safety equipment. Some machines may require the operation of safety gloves to better separate the user of the squeezing point safety device.
5. The operating machine is based on the use of an improper robotic automatic pipe bending machine, but if you use its bending, the machine may be damaged or malfunctioning to hurt you.
Wonsten Machinery Co., Ltd. is a professional production base for pipe processing machinery. The company has strong design and development capabilities, high-precision production testing equipment, excellence in years of production, continuous improvement and innovation, for automobiles, motorcycles, sports fitness equipment, The processing of metal pipe products in steel pipe furniture, travel and leisure products, plumbing and sanitary ware, etc. provides complete sets of perfect mechanical equipment.